Digi 34 Bedienungsanleitung

1 Quick Note 34 Configuring Syslog alerting on a TransPort router TransPort Support March 2013

10 This shows the syslog alerts on the syslog server, including the time stamp, the source IP address of the alert and the reason for the alert. T

11 5 CONFIGURATION FILES 5.1 Digi TransPort Configuration Files This is the relevant parts of the config.da0 file: ss237424>config c show eth 0

12 event 0 syslog_trig 9 event 0 action_dly 5 ssh 0 hostkey1 "privSSH.pem" ssh 0 nb_listen 5 ssh 0 v1 OFF Power Up Profile: 0 OK This is

13 RADIUS Client Revision: 1.0 SSH Server Revision: 1.0 SCP Revision: 1.0 CERT

2 Contents 1 Introduction ...

3 1 INTRODUCTION 1.1 Outline This document contains information regarding the configuration and use of syslog alerting. All Digi TransPort product

4 2 CONFIGURATION 2.1 Configuring the Event Logcodes First it is necessary to choose which events should trigger the syslog alerts. The Event log

5 Click on the %e %a down event (event number 5). On the following page, configure the Alarm Priority and Syslog Priority. The Syslog Priority

6 Repeat the process for Event 153, ‘PPP 1 up‘ Click Apply At the top of the screen, click ‘Save All Event Code Changes’ to save the changes

7 2.2 Configuring the Event Settings In the Event Handler, the syslog alarm priority (Send a Syslog message when the alarm priority is at least) sh

8 2.3 Configure Syslog server 0 Scroll down the page a little and expand the section titled Syslog Server 0. Configure the IP address of the Syslog

9 3 SYSLOG SERVER SOFTWARE There are plenty of network monitoring applications with syslog capabilities. The software used in this application note