
AnywhereUSB/5 (G2), AnywhereUSB/5 M
AnywhereUSB Remote I/O Concentrator User Guide 58
Hardware Interface Features
The unit provides 2 USB ports (standard A-type receptacles). The downstream ports support Low,
Full, and High Speed downstream devices.
Memory: 64MB RAM
Network interface features
Standards: IEEE 802.3, 802.3i (10Base-T), 802.3u (100Base-TX), 802.3x (full duplex and flow
control), HP Auto-MDIX (auto-detection of straight-through or crossover cabling)
Physical layer: 10/100 Mbps in half- or full-duplex mode, with auto-negotiation of speed and
duplex.
Ethernet connector: RJ-45
AnywhereUSB/5 (G2), AnywhereUSB/5 M
Dimensions
Length: 4.35 in (11.05 cm)
Width: 7.20 in (18.29 cm)
Height: 1.03 in (2.61 cm)
Weight: 10.00 oz. (283.5g)
Environmental
Operating temperature: 32
o
F to 131
o
F (0
o
C to 55
o
C)
Relative humidity: 0% to 95% (non-condensing)
Power requirements
The AnywhereUSB uses a 120/230VAC 50/60Hz power adapter that supplies 5VDC to the unit. It is
recommended that only the enclosed power supply be used with the AnywhereUSB. However,
power to the AnywhereUSB can be supplied by a UL-Listed Direct Plug-In Power Unit or
Information Technology Equipment Rated Power Unit rated 5VDC, at least 3.0 A, if used in the U.S.
and Canada or a power supply with similar rating and approved by your local safety code if it is
used elsewhere. For polarity, see the following diagram:
Note: The power supplies between the AWUSB/5 first and second generation (G2) models are
not interchangeable. Use the power supply provided with the unit.
Hardware interface features
The unit provides 5 USB ports (standard A-type receptacles). The downstream ports support Low,
Full, and High Speed downstream devices.
Memory: 128MB RAM
Kommentare zu diesen Handbüchern