Digi 34 Betriebsanweisung PDF herunterladen (Seite 88)

88 Chapter 10 Special Features: SNMP

• Read-write for MIB II (RFC 1213), which is an Internet-standard

MIB, consisting of managed objects from the systems, interfaces, IP,

ICMP, TCP, UDP, transmission, and SNMP group

• Read-write for the character-stream devices using SMIv2 MIB (RFC

1658)

• Read-write for the RS-232-like hardware devices MIB (RFC 1659)

• Read-write for the device server IP Network Control Protocol of the

Point-to-Point Protocol MIB (RFC 1473)

Message Support

The SNMP agent supports the Set, Get, GetNext, and Trap messages as

defined in RFC 1157. These messages are used as follows:

• Set, which means set the value of a specific object from one of the

supported MIBs

• Get, which means retrieve the value of a specific object form one of

the supported MIBs

• GetNext, which means retrieve the value of the next object in the

MIB

• Trap, which means send traps to the manager when a particular

type of significant event occurs

Supported Traps

The agent can send traps when any of the following occur:

• Cold starts (device server initializes)

• Authentication failures

• Login attempts

Configuration Procedure: Web Interface

1. Click SNMP under System from the menu.

2. Fill in the configuration fields and click Apply to save settings.

3. Click Reboot for changes to take effect.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 99 100

Vikiqqs 04 Jan 2024 | 11:28:05

urenrjrjkvnm

Digi 34 Betriebsanweisung Seite 88