Digi Digi One EM Installationsanleitung PDF herunterladen (Seite 54)

set autoconnect

54 Chapter 2 Command Descriptions

Examples Set autoconnect on with trigger

This example shows setting autoconnect to connect to the TCP port (2101)

of the network IP destination when data arrives on the serial port.

set autoconnect state=on trigger=data ipaddress=10.0.0.1

ipport=2101

Allow outgoing data that is either unacknowledged or is less than maximum

segment size

set autoconnect port=1 nodelay=on

Keine Kommentare

Digi Digi One EM Installationsanleitung Seite 54