Digi CM Betriebsanweisung PDF herunterladen (Seite 33)

Installing and Configuring PC Cards

Chapter 3 33

Note: The card is automatically discovered and a configuration menu is displayed.

4. Enter the appropriate parameters in the configuration menu.

5. Click Save & apply.

Note: If DHCP is active the IP address will appear after the configuration is saved and

applied.

Adding a Wireless LAN Card

To install and configure a wireless LAN card on the Digi CM unit, do the

following.

1. Insert the card into the PC slot.

2. Access the web interface.

3. Under the PC card heading, click Configuration.

Note: The card is automatically discovered and a configuration menu is displayed.

4. Click Configure the detected card.

5. Enter the appropriate parameters in the configuration menu.

WEP is the acronym for Wired Equivalent Privacy and is a security protocol

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 201 202

Keine Kommentare

Digi CM Betriebsanweisung Seite 33