
Configuring Network IP Filtering
76 Chapter 8
Be aware that you must apply the changes to make them active.
This screen shows five established IP rules.
This table describes the rules.
Rule Description
#1
Defines SSH access to the Digi CM unit (port 22).
• The Normal option specifies that the rule applies to all
addresses listed.
• The rule says to Accept traffic from these addresses for Port 22.
#2
Defines Telnet access to the Digi CM unit (port23).
• The Invert option specifies that the rule applies to all addresses
except those listed.
• The rule says to Drop traffic from all addresses not listed.
#3, 4, 5
Define access to the Digi CM unit using HTTP (port 80).
• Rule 3 blocks all traffic.
• Rule 4 allows access from IP address 192.168.1.0.
• Rule 5 allows access from IP address 192.168.2.0.
Allowable Hosts Input format
Base Host IP Address Subnet mask
Any host 0.0.0.0 0.0.0.0
192.168.1.120 192.168.1.120 255.255.255.255
192.168.1.1 -
192.168.1.254
192.168.1.0 255.255.255.0
192.168.0.1 -
192.168.255.254
192.168.0.0 255.255.0.0
192.168.1.1 -
192.168.1.126
192.168.1.0 255.255.255.128
192.168.1.129 -
192.168.1.254
192.168.1.128 255.255.255.128
Kommentare zu diesen Handbüchern