Digi CM Betriebsanweisung PDF herunterladen (Seite 34)

Adding a Serial Modem

34 Chapter 3

for wireless LANs using encryption to protect data transfers. If you are

unsure of the settings for the wireless card, see your network administrator.

SSID - Set Service Identifier and is the name of the wireless LAN network

Use WEP key - Enable or disable the WEP key

WEP mode - Encrypted or unencrypted

WEP key length - The options are 40 or 128 bits if the WEP key is enabled

WEP key string - Refer to the wireless network administrator for the

wireless encryption key string

6. Click Save to flash.

Adding a Serial Modem

The modem must first be inserted and installed on your system before it can

be used. To configure the modem do the following:

1. Access the web interface.

2. From the menu click Configuration under the PC card heading.

Note: The card is automatically discovered and a configuration menu is displayed.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 201 202

Keine Kommentare

Digi CM Betriebsanweisung Seite 34